Difference between revisions of "Accelerator Demo Day"

From edegan.com
Jump to navigation Jump to search
 
(43 intermediate revisions by 3 users not shown)
Line 1: Line 1:
{{McNair Projects
+
{{Project
 +
|Has project output=Tool
 +
|Has sponsor=McNair Center
 
|Has title=Accelerator Demo Day
 
|Has title=Accelerator Demo Day
 
|Has owner=Minh Le,
 
|Has owner=Minh Le,
Line 6: Line 8:
 
|Does subsume=Demo Day Page Parser, Demo Day Page Google Classifier
 
|Does subsume=Demo Day Page Parser, Demo Day Page Google Classifier
 
}}
 
}}
==Project==
+
==Project Introduction==
This project that utilizes Selenium and Machine Learning to get good candidate web pages and classify webpages as a demo day page containing a list of cohort companies, currently using scikit learn's random forest model and a bag of words approach
+
This project that utilizes Selenium and Machine Learning to get good candidate web pages and classify web pages as a demo day page containing a list of cohort companies, ultimately to gather good candidates to push to Mechanical Turk. The code is written using Python 3 using Selenium and Tensorflow (Keras). This article will also preliminaries of the Mechanical Turk tool and how it can be used to collect data.
 +
 
 +
==Project Goal==
 +
The goal of this project is to find good "Demo Day" candidate web pages and to submit these pages to Amazon Mechanical Turk for data collecting. A good candidate is defined as a page containing a list of cohort companies associated with an accelerator. Through observation, good candidates usually containing time and location information about the demo day as well and thus is sufficient to be pushed to MTurk to collect data.
 +
 
 
==Code Location==
 
==Code Location==
 
The source code and relevant files for the project can be found here:  
 
The source code and relevant files for the project can be found here:  
 
  E:\McNair\Projects\Accelerator Demo Day\
 
  E:\McNair\Projects\Accelerator Demo Day\
 +
The current working model using RF is in:
 +
E:\McNair\Projects\Accelerator Demo Day\Test Run
 +
The RNN model is in:
 +
E:\McNair\Projects\Accelerator Demo Day\Experiment
 +
The RNN is still under much development. Modifying anything in this folder is not recommended
 +
 +
All the other folders are used for experimenting purposes, please don't touch them. If you want to understand more about the files as a general user, go to the section A Quick Glance through the File in The Directory below. If you are a developer, go to the Advance User Guide section.
 +
 +
==General User Guide: How to Use this Project (Random Forest model)==
 +
 +
First, change your directory to the working folder:
 +
cd E:\McNair\Projects\Accelerator Demo Day\Test Run
 +
Then you need to specify the list of accelerators you want to crawl by modifying the following file:
 +
ListOfAccsToCrawl.txt
 +
The first line must remain fixed as "Accelerator". Then the next several rows are the Accelerators name. The name needs not to be case sensitive, but it is preferable that the case remains sensitive if possible.
 +
 +
All necessary preparations are now complete. Now onto running the code!
 +
 +
Running the project is as simple as executing the code in the correct order. The files are named in the format "STEPX_name", where as X is the order of execution. To be more specific, run the following 4 commands:
 +
''# Crawl Google to get the data for the demo day pages for the accelerator stored in ListOfAccsToCrawl.txt''
 +
python3 STEP1_crawl.py
 +
''# Preprocess data using a bag of word approach: each page is characterized by the frequencies of chosen keywords. Chosen keywords are stored in words.txt. This script reates a file called feature_matrix.txt''
 +
python3 STEP2_preprocessing_feature_matrix_generator.py
 +
''# Train the RF model''
 +
python3 STEP3_train_rf.py
 +
''# Run the model to predict on the HTML of the crawled HTMLs.''
 +
python3 STEP4_classify_rf.py
 +
 +
The result is stored in CrawledHTMLFull folder and is classified in two folder: positive and negative. The positive folder contains HTMLs that the classifier thought of as "good candidate." The negative contains the opposite. There is also a txt file called prediction.txt that lists everything. feature.txt is an irrelevant file for the general user, please ignore it. Its sole purpose is for analyzing and debugging.
 +
 +
NEVER touch the TrainingHTML folder, datareader.py or the classifier.txt. These are used internally to train data.
 +
 +
==A Quick Glance through the File in The Directory==
 +
All working file is stored in this folder:
 +
E:\McNair\Projects\Accelerator Demo Day\Test Run
 +
The file 
 +
 +
==Amazon Mechanical Turk==
 +
Please refer to: [[Amazon Mechanical Turk for Analyzing Demo Day Classifier's Results]]
 +
 +
 +
==Hand Collecting Data==
 +
 +
To crawl, we only looked for data on accelerators which did not receive venture capital data (which Ed found via VentureXpert) and lacked timing info. The purpose of this crawl is to find timing info where we cannot find it otherwise, and if a company received VC we can find timing info via that investment. The file we used to find instances in which we lack timing info and lacked VC is:
 +
/bulk/McNair/Projects/Accelerators/Summer 2018/Merged W Crunchbase Data as of July 17.xlsx
 +
 +
We filtered this sheet in Excel (and checked our work by filtering in SQL) and found 809 companies that lacked timing info and didn't receive VC. From this, we found 74 accelerators which we needed to crawl for.
 +
 +
We used the crawler to search for cohort companies listed for these accelerators.
 +
 +
During the initial test run, the number of good pages was 359. The data is then handled by hand by fellow interns.
 +
 +
The file for hand-coding is in:
 +
/bulk/McNair/Projects/Accelerator Demo Day/Test Run/CrawledDemoDayHTMLFull/'''FinalResultWithURL'''
 +
 +
For the sake of collaboration, the team copied this information to a Google Sheet, accessible here:
 +
https://docs.google.com/spreadsheets/d/16Suyp364lMkmUuUmK2dy_9MeSoS1X4DfFl3dYYDGPT4/edit?usp=sharing
 +
 +
We split the process into four parts. Each interns will do the following:
 +
 +
1. Go to the given URL.
 +
 +
2. Record whether the page is good data (column F); this can later be used by [[Minh Le]] to refine/fine-tune training data.
 +
 +
3. Record whether the page is announcing a cohort or recapping/explaining a demo day (column G). This variable will be used to decide if we should subtract weeks from the given date (e.g. if it is recapping a demo day, the cohort went through the accelerator for the past ~12 weeks, and we should subtract weeks as such).
 +
 +
4. Record date, month, year, and the companies listed for that given accelerator.
 +
 +
5. Note any any information, such as a cohort's special name.
 +
 +
Once this process is finished, we will filter only the 1s in Column F, and [[Connor Rothschild]] and [[Maxine Tao]] will work to populate empty cells in The File to Rule Them All with that data.
 +
 +
 +
==Advance User Guide: An in-depth look into the project and the various settings==
 +
 +
===Accelerators needed to Crawl===
 +
The name lists of Accelerators to crawl is stored in the file:
 +
E:\McNair\Projects\Accelerator Demo Day\Test Run\ListOfAccsToCrawl.txt
 +
 +
===Training Data===
 +
Training data is stored in the folder:
 +
E:\McNair\Projects\Accelerator Demo Day\Test Run\TrainingHTML
 +
 +
===The Crawler Functionality===
 +
The crawler functionality is stored in the file:
 +
STEP1_crawl.py
 +
The crawler was optimized for improved speed, improved performance and improved filtration while remain functional over the large set of data.
 +
 +
BUG REPORT by Maxine Tao (FIXED): update the crawler with this line of code:
 +
search_results = driver.find_elements_by_xpath("//div[@class='g']/div/div/div/h3/a") + driver.find_elements_by_xpath("//div[@class='g']/div/div/h3/a")
 +
Because apparently for some reason it stopped grabbing the first web page (I think because google may have modified how their website looks.
 +
 +
===The Classifier===
 +
 +
===Input (Features)===
 +
The input (features) right now is the frequency of X_NUMBER of words appearing in each documents. The word choice is hand selected. This is the naive bag-of-word approach.
 +
 +
Idea: Create a matrix with the first col being the file BiBTex, and the following columns are the words, and the value at (file, word) is the frequency of that word in the file.
 +
Then, split the matrix into an array of row vectors, and each vector is then feed into the RNN)
 +
 +
This seems to not give really high accuracy with our LSTM RNN, so I will consider a word2vec approach
 +
 +
==Development Notes==
 +
Right now I am working on two different classifier: Kyran's old Random Forest model - optimizing it by tweaking parameters and different combination of features - and my RNN text classifier.
 +
 +
The RF model has a ~92% accuracy on the training data and ~70% accuracy on the test data.
 +
 +
The RNN currently has a ~50% accuracy on both train and est data, which is rather concerning.
 +
 +
Test : train ratio is 1:3 (25/75)
 +
 +
Both model is currently using the Bag-of-word approach to preprocess data, but I will try to use Yang's code in the industry classifier to preprocess using word2vec. I'm not familiar with this approach, but I will try to learn this.
 +
 +
==Reading resources==
 +
http://www.fit.vutbr.cz/research/groups/speech/publi/2010/mikolov_interspeech2010_IS100722.pdf

Latest revision as of 13:47, 21 September 2020


Project
Accelerator Demo Day
Project logo 02.png
Project Information
Has title Accelerator Demo Day
Has owner Minh Le
Has start date 06/18/2018
Has deadline date
Has project status Active
Dependent(s): Amazon Mechanical Turk for Analyzing Demo Day Classifier's Results, U.S. Seed Accelerators
Does subsume Demo Day Page Parser, Demo Day Page Google Classifier
Has sponsor McNair Center
Has project output Tool
Copyright © 2019 edegan.com. All Rights Reserved.

Project Introduction

This project that utilizes Selenium and Machine Learning to get good candidate web pages and classify web pages as a demo day page containing a list of cohort companies, ultimately to gather good candidates to push to Mechanical Turk. The code is written using Python 3 using Selenium and Tensorflow (Keras). This article will also preliminaries of the Mechanical Turk tool and how it can be used to collect data.

Project Goal

The goal of this project is to find good "Demo Day" candidate web pages and to submit these pages to Amazon Mechanical Turk for data collecting. A good candidate is defined as a page containing a list of cohort companies associated with an accelerator. Through observation, good candidates usually containing time and location information about the demo day as well and thus is sufficient to be pushed to MTurk to collect data.

Code Location

The source code and relevant files for the project can be found here:

E:\McNair\Projects\Accelerator Demo Day\

The current working model using RF is in:

E:\McNair\Projects\Accelerator Demo Day\Test Run

The RNN model is in:

E:\McNair\Projects\Accelerator Demo Day\Experiment

The RNN is still under much development. Modifying anything in this folder is not recommended

All the other folders are used for experimenting purposes, please don't touch them. If you want to understand more about the files as a general user, go to the section A Quick Glance through the File in The Directory below. If you are a developer, go to the Advance User Guide section.

General User Guide: How to Use this Project (Random Forest model)

First, change your directory to the working folder:

cd E:\McNair\Projects\Accelerator Demo Day\Test Run

Then you need to specify the list of accelerators you want to crawl by modifying the following file:

ListOfAccsToCrawl.txt

The first line must remain fixed as "Accelerator". Then the next several rows are the Accelerators name. The name needs not to be case sensitive, but it is preferable that the case remains sensitive if possible.

All necessary preparations are now complete. Now onto running the code!

Running the project is as simple as executing the code in the correct order. The files are named in the format "STEPX_name", where as X is the order of execution. To be more specific, run the following 4 commands:

# Crawl Google to get the data for the demo day pages for the accelerator stored in ListOfAccsToCrawl.txt
python3 STEP1_crawl.py
# Preprocess data using a bag of word approach: each page is characterized by the frequencies of chosen keywords. Chosen keywords are stored in words.txt. This script reates a file called feature_matrix.txt
python3 STEP2_preprocessing_feature_matrix_generator.py
# Train the RF model
python3 STEP3_train_rf.py
# Run the model to predict on the HTML of the crawled HTMLs.
python3 STEP4_classify_rf.py

The result is stored in CrawledHTMLFull folder and is classified in two folder: positive and negative. The positive folder contains HTMLs that the classifier thought of as "good candidate." The negative contains the opposite. There is also a txt file called prediction.txt that lists everything. feature.txt is an irrelevant file for the general user, please ignore it. Its sole purpose is for analyzing and debugging.

NEVER touch the TrainingHTML folder, datareader.py or the classifier.txt. These are used internally to train data.

A Quick Glance through the File in The Directory

All working file is stored in this folder:

E:\McNair\Projects\Accelerator Demo Day\Test Run

The file

Amazon Mechanical Turk

Please refer to: Amazon Mechanical Turk for Analyzing Demo Day Classifier's Results


Hand Collecting Data

To crawl, we only looked for data on accelerators which did not receive venture capital data (which Ed found via VentureXpert) and lacked timing info. The purpose of this crawl is to find timing info where we cannot find it otherwise, and if a company received VC we can find timing info via that investment. The file we used to find instances in which we lack timing info and lacked VC is:

/bulk/McNair/Projects/Accelerators/Summer 2018/Merged W Crunchbase Data as of July 17.xlsx

We filtered this sheet in Excel (and checked our work by filtering in SQL) and found 809 companies that lacked timing info and didn't receive VC. From this, we found 74 accelerators which we needed to crawl for.

We used the crawler to search for cohort companies listed for these accelerators.

During the initial test run, the number of good pages was 359. The data is then handled by hand by fellow interns.

The file for hand-coding is in:

/bulk/McNair/Projects/Accelerator Demo Day/Test Run/CrawledDemoDayHTMLFull/FinalResultWithURL

For the sake of collaboration, the team copied this information to a Google Sheet, accessible here:

https://docs.google.com/spreadsheets/d/16Suyp364lMkmUuUmK2dy_9MeSoS1X4DfFl3dYYDGPT4/edit?usp=sharing

We split the process into four parts. Each interns will do the following:

1. Go to the given URL.

2. Record whether the page is good data (column F); this can later be used by Minh Le to refine/fine-tune training data.

3. Record whether the page is announcing a cohort or recapping/explaining a demo day (column G). This variable will be used to decide if we should subtract weeks from the given date (e.g. if it is recapping a demo day, the cohort went through the accelerator for the past ~12 weeks, and we should subtract weeks as such).

4. Record date, month, year, and the companies listed for that given accelerator.

5. Note any any information, such as a cohort's special name.

Once this process is finished, we will filter only the 1s in Column F, and Connor Rothschild and Maxine Tao will work to populate empty cells in The File to Rule Them All with that data.


Advance User Guide: An in-depth look into the project and the various settings

Accelerators needed to Crawl

The name lists of Accelerators to crawl is stored in the file:

E:\McNair\Projects\Accelerator Demo Day\Test Run\ListOfAccsToCrawl.txt

Training Data

Training data is stored in the folder:

E:\McNair\Projects\Accelerator Demo Day\Test Run\TrainingHTML

The Crawler Functionality

The crawler functionality is stored in the file:

STEP1_crawl.py

The crawler was optimized for improved speed, improved performance and improved filtration while remain functional over the large set of data.

BUG REPORT by Maxine Tao (FIXED): update the crawler with this line of code:

search_results = driver.find_elements_by_xpath("//div[@class='g']/div/div/div/h3/a") + driver.find_elements_by_xpath("//div[@class='g']/div/div/h3/a")

Because apparently for some reason it stopped grabbing the first web page (I think because google may have modified how their website looks.

The Classifier

Input (Features)

The input (features) right now is the frequency of X_NUMBER of words appearing in each documents. The word choice is hand selected. This is the naive bag-of-word approach.

Idea: Create a matrix with the first col being the file BiBTex, and the following columns are the words, and the value at (file, word) is the frequency of that word in the file. Then, split the matrix into an array of row vectors, and each vector is then feed into the RNN)

This seems to not give really high accuracy with our LSTM RNN, so I will consider a word2vec approach

Development Notes

Right now I am working on two different classifier: Kyran's old Random Forest model - optimizing it by tweaking parameters and different combination of features - and my RNN text classifier.

The RF model has a ~92% accuracy on the training data and ~70% accuracy on the test data.

The RNN currently has a ~50% accuracy on both train and est data, which is rather concerning.

Test : train ratio is 1:3 (25/75)

Both model is currently using the Bag-of-word approach to preprocess data, but I will try to use Yang's code in the industry classifier to preprocess using word2vec. I'm not familiar with this approach, but I will try to learn this.

Reading resources

http://www.fit.vutbr.cz/research/groups/speech/publi/2010/mikolov_interspeech2010_IS100722.pdf