Changes
Jump to navigation
Jump to search
Web Server Documentation (view source)
Revision as of 17:27, 17 February 2016
, 17:27, 17 February 2016→Configuring RAID 1 on Web Server (2/17/2016)
One RAID device (/dev/md0): RAID1, 2 active devices (/dev/sda3 and /dev/sdb3), 0 spare devices. set partition: use as ext4 filesystem, mount point /
Fourth partitioning attempt:
First hard disk (/dev/sda):
* 10 MB partition, use as reserved BIOS boot area, bootable flag off
* 32 GB partition, use as swap space
* rest of the space partition, use as ext4 filesystem, mount point /, bootable flag off
Second hard disk (/dev/sdb):
* 10 MB partition, use as reserved BIOS boot area, bootable flag off
* 32 GB partition, use as swap space
* rest of the space partition, use as ext4 filesystem, mount point /, bootable flag off
First RAID device (/dev/md0): RAID1, 2 active devices (/dev/sda3 and /dev/sdb3), 0 spare devices. set partition: use as ext4 filesystem, mount point /
Second RAID device (/dev/md1): RAID1, 2 active devices (/dev/sda1 and /dev/sdb1), 0 spare devices. set partition: use as ext4 filesystem, mount point /boot
Third RAID device (/dev/md2): RAID0, 2 active devices (/dev/sda2 and /dev/sdb2). set partition: use as swap area
Database server drive partition specs:
