Changes
Jump to navigation
Jump to search
Database Server Documentation (view source)
Revision as of 19:24, 19 February 2016
, 19:24, 19 February 2016→Installing Ubuntu (2/19/2016)
Choose the 3.0 TB partition in the RAID device and configure it to use as ext4 filesystem and mount point /bulk (choose "Enter it manually" in the mount point selection menu). Then choose "Finish partitioning and write changes to disk" at the bottom of the partitioner menu. Confirm that the partition changes to be made are correct. Then wait for the partitions to be formatted.
After the system is installed, the installer will prompt for software selection. Choose OpenSSH server, PostgreSQL database, and Samba file server for installation.After it finishes, it will prompt if you want to install the GRUB bootloader onto the master boot record. From my experience with [[Web Server Documentation|setting up the webserver]], choose "No" and on the next screen, install the bootloader to "/dev/sda /dev/sdb /dev/sdc /dev/sdd"
